MPM Squeegee Holders for Metal Blades - Fits UP2000 models & SPM

  

The MPM style UPH squeegee blade holder is made to fit the UltraPrint 2000 model printer and most models of the SPM. This holder accommodates flat metal blades. Made from anodized aluminum, it comes with mounting studs and knobs. Metal and paste deflectors are sold separately.  They are sold in sets of two. When ordering specify for use with metal, and make sure ot order metal baldes and deflectors. Metal blade parts numbers start with Part # UPFMI. (Metal blade shown in photo).

The standard "angle of attack" or printing angle for these squeegee holders is 60º. Custom angles, such as 45º are available upon request. The 60 degree angle is the preferred angle of attack when printing solder paste and other high viscosity, high solid content materials through open aperture stencils. A 45º angle of attack is the preferred angle when printing inks and epoxy's through cross sectional screens with an emulsion.

To order just the set of two squeegee holders, see the information below: 

** For our special holders and blades intended for Lead Free Lines, add "-LF" to the part number when ordering 

Speedline/MPM Squeegee Holders, No Blades or Deflectors

Printer

Part#

Description

Qty

Unit

UP2000 / SPM

UPH-6

6" Clamp Style Holder for Flat Metal Blade

2

Set

UP2000 / SPM

UPH-8

8" Clamp Style Holder for Flat Metal Blade

2

Set

UP2000 / SPM

UPH-10

10" Clamp Style Holder for Flat Metal Blade

2

Set

UP2000 / SPM

UPH-12

12" Clamp Style Holder for Flat Metal Blade

2

Set

UP2000 / SPM

UPH-14

14" Clamp Style Holder for Flat Metal Blade

2

Set

UP2000 / SPM

UPH-16

16" Clamp Style Holder for Flat Metal Blade

2

Set

UP2000 / SPM

UPH-19

19" Clamp Style Holder for Flat Metal Blade

2

Set

UP2000 / SPM

UPH-20.5

20.5" Clamp Style Holder for Flat Metal Blade

2

Set


To order complete assemblies, which include the set of two squeegee holders, complete with metal squeegee blades and side solder paste deflectors, pre-assembled and ready to use, see the part number information below: 

Speedline/MPM Squeegees, Complete Assemblies with Holders, Metal Blades, & Deflectors

Printer

Part#

Description

Qty

Unit

UP2000 / SPM

UPHA-6

6" Clamp Style Holder/Blade & Paste Deflector Assembly

2

Set

UP2000 / SPM

UPHA-8

8" Clamp Style Holder/Blade & Paste Deflector Assembly

2

Set

UP2000 / SPM

UPHA-10

10" Clamp Style Holder/Blade & Paste Deflector Assembly 

2

Set

UP2000 / SPM

UPHA-12

12" Clamp Style Holder/Blade & Paste Deflector Assembly

2

Set

UP2000 / SPM

UPHA-14

14" Clamp Style Holder/Blade & Paste Deflector Assembly

2

Set

UP2000 / SPM

UPHA-16

16" Clamp Style Holder/Blade & Paste Deflector Assembly

2

Set

UP2000 / SPM

UPHA-19

19" Clamp Style Holder/Blade & Paste Deflector Assembly

2

Set

UP2000 / SPM

UPHA-20.5

20.5" Clamp Style Holder/Blade & Paste Deflector Assembly

2

Set

For part numbers and information on metal squeegee blades for these UPH style hodlers, click the button below:  

Click for Poly Blade Holders