MPM Squeegee Holders for Poly Blades - Fits UP2000 models & SPM

  

The MPM style UPPH squeegee blade holder is made to fit the Ultra Print 2000 model printer and most models of the SPM. This holder accommodates polyurethane squeegee blades. Made from gold anodized aluminum, it comes with mounting studs and knobs. Polyurethane blades  and side paste deflectors are sold separately. Squeegee holders and blades are sold in sets of two, deflectors are sold in sets of 4, 2 for each holder.. When ordering specify use, with polyurethane blades, whose part numbers start with part # UPPBI. See the table below for part numbers, click the links below the data table for information on polyurethane squeegee blades for these holders. 

The standard "angle of attack" or printing angle for these squeegee holders is 60º. Custom angles, such as 45º are available upon request. The 60 degree angle is the preferred angle of attack when printing solder paste and other high viscosity, high solid content materials through open aperture stencils. A 45º angle of attack is the preferred angle when printing inks and epoxy's through cross sectional screens with an emulsion.

Speedline/MPM Squeegee Holders, No Blades or Deflectors

Printer

Part#

Description

Qty

Unit

 UP2000 / SPM

UPPH-6

6" Clamp Style Holder for Polyurethane Blade

2

Set

 UP2000 / SPM

UPPH-8

8" Clamp Style Holder for Polyurethane Blade

2

Set

 UP2000 / SPM

UPPH-10

10" Clamp Style Holder for Polyurethane Blade

2

Set

 UP2000 / SPM

UPPH-12

12" Clamp Style Holder for Polyurethane Blade

2

Set

 UP2000 / SPM

UPPH-14

14" Clamp Style Holder for Polyurethane Blade

2

Set

 UP2000 / SPM

UPPH-16

16" Clamp Style Holder for Polyurethane Blade

2

Set

 UP2000 / SPM

UPPH-19

19" Clamp Style Holder for Polyurethane Blade

2

Set

 UP2000 / SPM

UPPH-20.5

20.5" Clamp Style Holder for Flat Metal Blade

2

Set

For infortaion and part numbers for polyuretahne squeegee baldes for the UPPH squeegee holders, click the button below:

Click to go to Metal Blade Holders