Part # 0321 Universal Hand Held Squeegee Blade Cutter  

 

The new and improved squeegee blade cutter from JNJ Industries cuts squeegee blades cleanly and safely. For diamond, single edge and trailing edge (rectangular) shaped polyurethane squeegee blades, this ergonomically designed tool comes with a precision steel blade and a set of 4 replacement blades. Made from cast steel that has been chrome plated to resist rust, the handles are coated in comfortable molded rubber grips, with a slide out storage compartment for spare blades built right into the handle. There is a Safety Lock built into the handle to lock the tool in the closed position when not in use. 

 

The top jaw of the cutter holds a standard utility knife blade, and the lower jaw is equipped with a custom guide anvil system that is designed to hold either a 3/8” x 3/8” diamond shaped blade or a 3/8” x 3/4” tall single edge blade securely for cutting. Rectangular or trailing edge style blades are cut just as easy by laying the squeegee on the top portion of the custom guide anvil system. This cutter will cut polyurethane blades ranging from 50 to 100 durometer in all 3 standard sizes and shapes. 

 

There is a simple 3 step system for changing the blades.  

 

Step 1: Pull the handles open past the first stop position. 

 

Step 2: Remove the blade which as been partially ejected from its locked position. Make sure to use caution when grabbing the blade when removing it. 

 

Step 3: Insert the new blade, making sure that the upper most “u” shaped notch on the utility blade is aligned with the screw on the top jaw mechanism, and that the back edge of the blade is resting up against the base of the top jaw unit. Close the jaws, squeezing the handles together firmly to lock the blade in place. 

 

CAUTION: THE BLADES ARE EXTREMELY SHARP! BE VERY CAREFUL WHEN HANDLING. ONLY USE TO CUT POLYURETHANE SQUEEGEE MATERIAL. See Diagram below:

 

                                                                              Cutter diagram