My Sitemap

  • The 401 UnderStencil SmartWipes® are designed especially for cleaning SMT stencils and screen/stencil printing machines. This wipe effectively absorbs solder paste, flux residue, inks and epoxies, with or without solvent. The 401 wipe will keep stencil undersides clean from excess residue in between prints to prevent solder paste contamination on PC boards. Ideal for cleaning standard pitch, fine pitch, and ultra fine pitch stencil images, they resist tearing and shredding, and are very low in lint.
    401-UnderStencil-Wipes.html
  • Our SelectaWipes rolls have 200 perforated wipes and were designed for cleaning stencils, screens, PC boards, squeegees, tools and machinery. An economical all purpose wipe that can be used for every type of industrial cleaning application. SelectaWipes allow users to tear off a clean room grade wipe with the ease of paper towel. These wipes are made from the same DuPont Sontara® Cleanmaster material as our 401 UnderStencil Wipes and our Standard 4000 Series SmartRoll UnderStencil Wiping Rolls. They are tough and absorbent, and resist tearing or shredding, even when wet.
    Selecta-Wipe-Rolls.html
  • Manufactured from 100% continuous filament polyester fiber, JNJ’s UltraClean SmartWipes® ensure superior cleaning performance with extremely low particle generation and soluble extractables. This wipe is soft and will not scratch, and becomes softer when wet, while maintaining high tensile strength. Unaffected by solvents, UltraClean wipes have very low electrostatic discharge. UltraClean wipes are excellent for cleaning glass and ceramic substrates, CD discs, instrumentation, tools, and the bottom of screens. UltraClean Unlaundered is one of our most popular wipes and is widely used in screen printing applications where lint free cleaning is critical
    UltraClean-Wipes.html
  • Polyesrter wipes, 9" x 9", bulk packed. Used for wiping the bottom of screens and stencils, they are soft, and made froma continuous fila,emt polyester fiver.
    UltraClean-Unlaundered.html
  • For precision optics and highly polished surfaces, JNJ’s OptiSmart SmartWipes feature a weave of soft, microscopic polyester fibers, 1/200th the diameter of a human hair. OptiSmart wipes scoop up and trap oil and dirt between the ultra fine fibers to safely clean finger smudges, dirt, oil, and all types of residue from delicate optical surfaces including camera lenses, microscope lenses, glasses, telescopes, gun sights, night vision goggles, plasma screens, LCD screens and monitors, and glass slides. These super soft wipes will not scratch or smudge, and can be used dry or with solvents.
    OpitSmart-Wipes.html
  • JNJ Foam Wipes are made from fully reticulated (open cell) polyurethane foam. The 443 Foam SmartWipes are white in color, and can be Clean Room packaged. Foam wipes are absorbent to solvents and solutions, as well as many forms of contaminants. Foam wipes are the only true non-abrasive, lint free wipes. The exceptionally low particle generation makes them ideal for Clean Room applications.
    Foam-Wipers.html
  • EquaStat SmartWipes® are comprised of continuous filament polyester fiber that includes DuPont's patented Negastat® carbon yarn. Negastat enhances the electrical conductivity which promptly disperses electrical static, preventing the build up of electro static charges. The knit construction of EquaStat also increase product integrity and decreases particle generation and soluble extractables. EquaStat is laundered in ultra-filtered water of 0.45u purity and dried in a HEPA filtered class 100 air stream. each wipe is hermetically sealed within a Class 100 clean room and meets Federal Standard 209.
    Anti-Static-(ESD).html
  • ESD safe, anti static roll of fabric, used to provide an ESD surface for work benches, storage areas, and transport devices to protect sensitive electronic devices from electro static discharge
    EquaStat-ESD-Roll.html
  • For laboratory clean up, light manufacturing and parts cleaning requiring a rugged, highly absorbent wipe, The Blue Comet wipes feature a hydro-entangled blend of cellulose and polyester fibers for exceptional dimensional stability. Polyester fiber delivers strength while cellulose provides super wicking action and absorbency. This is a non-woven wipe, free of chemical binders. Available in two colors, blue (Blue Comet) and white (White Tornado), these SmartWipes® from JNJ resist tearing and shredding, and are very low in lint. They are available in both a "plain" and a textured or "creped" surface. The textured or creped version provides enhanced cleaning performance by means of additional scrubbing power due to the textured surface.
    Blue-Comet.html
  • Rolls or logs of wipes, and they are available in 3 different material grades. One is 100% polyester form Dupont Sontara technologies suitable for electronic and critical cleaning; one is a blend of polyester and cellulose that is a rugged wipe suitable for indsutrial wiping applications; the thrid is a blend of polypropylene and cellulose, with a texture surface made up of melt blown polypropylene on top of teh cellulose wipe substrate.
    Roll-of-Wipes.html
  • Electronics.html
  • JNJ’s SuperSaturated SmartWipes®offer cleaning solutions where and when you need them. You will always have the right wipe, with the right chemistry at your fingertips. Our SuperSaturated SmartWipes feature a durable, solvent retentive material substrate that cleans effectively without leaving excess solvent behind. Each wipe is saturated with the proper amount of GlobalTech® CFC & HCFC Free solvent and is packaged in a recyclable, reusable canister. The strong, super absorbent wipes are 100% cleanroom grade polyester, low in lint, and resist tearing and shredding. SuperSaturated SmartWipes trap dirt, grease, solder paste, flux residue, epoxy, ink, and other contaminate particles
    Saturated-Wipes.html
  • This is an aqueous based cleaning wipe that removes solder paste and flux residue. It is for use in printed circuit board assembly areas.
    AquaSonic-Cleaner-for-Surface-Mount-Applications.html
  • This saturated wipe is certified as a Clean Air Solvent by the South Coast Air Quality Management District (SCAQMD) in Southern California. It has no falsh point and virtually no odor. It is excellent for clenaing or removing wet or uncured solder paste and flux residue from stencils, boards, squeegees, tools, and machinery.
    AquaSonic-Cleaner-for-Solder-Paste-&-Flux.html
  • Benchtop Electronic Hand Cleaner has been laboratory certified to be effective in the removal of lead and other toxic metals from all surfaces including the skin. Designed to be used at the workbench or any location where operators hands become soiled. Cleans hands, surfaces, fixtures and tools without requiring the operator to leave the work area. Designed for operators and technicians who routinely handle soldered PC boards and assemblies, solder reflow, wave soldering, solder paste screening, tin/lead plating and hot air solder leveling processes. GlobalTechs hand cleaner leaves skin soft and clean, and eliminates contaminant discharge down the drain.
    Benchtop-Hand-Cleaner-Wipes.html
  • Bioact SC-10 Electronics Cleaner is a blend of highly refined aliphatic hydrocarbons, orange terpenes, and linear alcohols formulated to offer superior performance in stencil/misprint cleaning and de-fluxing applications. It is an ideal replacement for Isopropanol (IPA) in hand wipe cleaning applications where performance, safety, and VOC emissions need to be improved. Bioact SC-10 Electronics Cleaner was developed for removing all types of uncured epoxies. SMD Adhesives, and un-reflowed solder paste and flux from stencils, squeegees, and misprinted PC boards and assemblies. It is also effective in removing many rosin, water soluble, no-clean, and lead free solder paste residues, as well as acrylic and silicone conformal coatings and tape residue
    Bioact-SC-10-Wipes.html
  • BSC-10A-Electronics-Cleaner-Wipes.html
  • A super aggressive solvent for cleaning conductive epoxies, 2 part epoxies, label adhesives, labels, and most varieties of glue or adhesive residues. Excellent for cleaning screen printable epoxies used in electronics. Tested and approved for Heraeus epoxies, epoxy numbers PD911, PD 922, & PD86002. It has extremely low "wet out", getting underneath glues and adhesives to help break the bond
    Eopxy-&-Adhesive-Remover-Wipes.html
  • GlobalTech Industrial Hand Cleaner wipes are a high performance, general purpose cleaner in a pre-saturated wipe dispenser. They clean hands without the need to leave the work area or to go to a sink. Hands will dry quickly, and require no rinsing or toweling off like other "scrubby" wipes. They are Laboratory Certified to be effective in the removal of toxic metals from skin. Heavy and undetectable metals and contaminants are removed from the skin before absorption by our proprietary chelating agent, preventing materials from being ingested into the liver, which can cause some forms of cancer. The "Dual Action" wipe material provides additional scrubbing action on one side and standard cleaning on the other.
    Hand-Cleaner-w-Chelator.html
  • Hand Cleaner is a high performance, general purpose cleaner in a pre-saturated wipe dispenser. Cleans hands, surfaces, fixtures and tools without being required to leave the work area Laboratory Certified to be effective in the removal of toxic metals from all surfaces, including the skin. Heavy and undetectable metals and contaminants are removed from the skin before absorption, preventing materials from being ingested into the liver, which can cause some forms of cancer.
    Hand-Cleaners.html
  • A universal cleaner and disinfectant with deionized water, GlobalTech’s Isopropyl Alcohol and DI Water formulation removes most types of inks, pastes, light oils and contaminants associated with soldering, fluxes, printing and most industrial cleaning applications. Also available in a 99% pure Isopropyl Alcohol. Made with a 100% DuPont Sontara ® polyester wipe that is Cleanroom grade Class 100 compatible, it is suitable for electronics applciations.
    IPADI-Wipes.html
  • A universal cleaner and disinfectant with deionized water, GlobalTech Isopropyl Alcohol 99% formulation removes most types of inks, pastes, light oils and contaminants associated with soldering, fluxes, printing and most industrial cleaning applications. Our IPA99 is actually between 99.8 and 99.9% pure isopropyl alcohol. Made with a 100% DuPont Sontara ® polyester wipe that is Class 100 compatible, it is suitable for electronics applications
    IPA-Wipes.html
  • A universal cleaner and disinfectant, these alcohol wipes are available in pure IPA or in a blend with deionized water. GlobalTech Isopropyl Alcohol formulations remove most types of inks, pastes, light oils and contaminants associated with manufacturing environments, printing and most industrial cleaning applications. Made with an industrial quality wipe material, these are ideal for wiping down machines, tools, assemblies, mechanical parts, electrical hardware, and equipment. IPA is safe for use on all types of surfaces made from a variety of materials, and will not harm plastics.
    Industrial-Grade-IPA-Wipes.html
  • Formulated to remove conductive, resistive, and dielectric thick film inks, as well as commercial inks, GlobalTech Ink & Screen Cleaner is used in the electronics and commercial screen printing industries. Inks, pastes, silicones, and most contamination associated with fluxes are removed safely from screens without damaging emulsions. Can be sprayed on, immersed or wiped with a cloth. Good for cleaning tools and machinery, as well as mis-prints
    Ink-and-Screen-Wipes.html
  • flux residues from stencils, squeegees, printers, tools, machinery and PC boards, leaving no residue. It has been specially formulated with a blend of solvents, alcohols, and DI Water to penetrate those difficult to clean lead-free materials, staying around long enough to clean, yet drying fast enough to keep production flowing. RoHS compliance has resulted in many new soldering materials being introduced into the SMT market place, and new soldering materials have forced the need for new cleaning chemistries. Our Lead-Free Paste Remover meets today's demanding cleaning requirements and is perfect for all types of electronics cleaning, and works equally as well on solder pastes and flux materials that use lead.
    Lead-Free-Paste-Wipes.html
  • A safe, low cost cleaner for water soluble and rosin based fluxes and for general degreasing applications. GlobalTech Semi Aqueous Paste & Flux Remover works quickly to remove tough organic contaminants such as soldering oils, waxes, and other similar soils found in electronic assembly manufacturing. Excellent for cleaning printing screens, stencils and for misprinted PC boards. Does not require a rinse
    Semi-Aqueous-Paste-Wipes.html
  • A fast drying odor free solvent, GlobalTech SMT Stencil Cleaner quickly removes solder paste from stencils, squeegees, printers, tools, machinery and PC boards, leaving no residue. Perfect for both manual and automatic cleaning, this formulation has been approved for use by DEK in the solvent bar system for their automatic stencil wiper assembly. An excellent all purpose cleaner and degreaser, it is safe for sue with most plastics and can be used to degrease UV curable inks & adhesives or as a general parts degreaser. Approved for use in DEK solvent bar systems. Not recommended for water soluble pastes and flux
    SMT-Stencil-Cleaner-Wipes.html
  • The preferred defluxer for R, RA, & RMA type fluxes. GlobalTech Solder Paste & Flux Remover cleans PC boards, contacts, relays, gold fingers and most types of electronic assemblies. Offering superior defluxing properties, this formulation may be used straight for maximum cleaning power or diluted for use in dip or ultrasonic tanks. The high flash point makes this cleaner ideal for spray applications
    Solder-Paste-Remover-Wipes.html
  • SW100NC.html
  • Canister-Holder.html
  • Foil-Refill-Packs.html
  • Quick cross reference chart for JNJ solventsa nd saturtaed wipes. Look at a summary of key attributes for the various wipes, such as drying time, cleaning power, and uses.
    Selection-Guide-for-Wipes.html
  • Bioact SC-10 Electronics Cleaner is a blend of highly refined aliphatic hydrocarbons, orange terpenes, and linear alcohols formulated to offer superior performance in stencil/misprint cleaning and de-fluxing applications. It is an ideal replacement for Isopropanol (IPA) in hand wipe cleaning applications where performance, safety, and VOC emissions need to be improved. Bioact SC-10 Electronics Cleaner was developed for removing all types of uncured epoxies. SMD Adhesives, and un-reflowed solder paste and flux from stencils, squeegees, and misprinted PC boards and assemblies. It is also effective in removing many rosin, water soluble, no-clean, and lead free solder paste residues, as well as acrylic and silicone conformal coatings and tape residue
    Bioact-SC-10.html
  • Bioact SC-10 Electronics Cleaner is a blend of highly refined aliphatic hydrocarbons, orange terpenes, and linear alcohols formulated to offer superior performance in stencil/misprint cleaning and de-fluxing applications. It is an ideal replacement for Isopropanol (IPA) in hand wipe cleaning applications where performance, safety, and VOC emissions need to be improved. Bioact SC-10 Electronics Cleaner was developed for removing all types of uncured epoxies. SMD Adhesives, and un-reflowed solder paste and flux from stencils, squeegees, and misprinted PC boards and assemblies. It is also effective in removing many rosin, water soluble, no-clean, and lead free solder paste residues, as well as acrylic and silicone conformal coatings and tape residue
    BSC-10A-Electronics-Cleaner.html
  • A super aggressive solvent for cleaning conductive epoxies, 2 part epoxies, label adhesives, labels, and most varieties of glue or adhesive residues. Excellent for cleaning screen printable epoxies used in electronics. Tested and approved for Heraeus epoxies, epoxy numbers PD911, PD 922, & PD86002. It has extremely low "wet out", getting underneath glues and adhesives to help break the bond
    Epoxy-&-Ahesive-Cleaner.html
  • This is cleaning system that includes a spray cleaner with microfiber wipe that is used to clean flat panel and tocuh screen displays. It is designed for use to clean tablet computers, touch screen monitors, E-Readers, laptop screens, Flat panel TV's, optics, camera lenses, eye glasses, and much more.
    Flat-Panel-Display-Cleaner.html
  • Formulated to remove conductive, resistive, and dielectric thick film inks, as well as commercial inks, GlobalTech Ink & Screen Cleaner is used in the electronics and commercial screen printing industries. Inks, pastes, silicones, and most contamination associated with fluxes are removed safely from screens without damaging emulsions. Can be sprayed on, immersed or wiped with a cloth. Good for cleaning tools and machinery.
    Ink-&-Screen-Cleaner.html
  • A universal cleaner and disinfectant with deionized water, GlobalTech® Iprosopyl Alcohol and DI Water formulation removes most types of inks, sodler pastes, flux, light oils and contaminants associated with soldering, fluxes, printing and most industrial cleaning applications. The wipes are the most popular wipe used in the pc board assembly industry (SMT). Safe for use on most surfaces, it also a great product for dissinfecting hard surfaces.
    IPA-DI-Water.html
  • A universal cleaner and disinfectant with deionized water, GlobalTech�s Isopropyl Alcohol 99% formulation removes most types of inks, pastes, light oils and contaminants associated with soldering, fluxes, printing and most industrial cleaning applications
    IPA99.html
  • A very fast drying and very low odor solvent, GlobalTech Lead-Free Paste Remover quickly removes the new high tack Lead-Free solder paste and flux residues from stencils, squeegees, printers, tools, machinery and PC boards, leaving no residue. It has been specially formulated with a blend of solvents, alcohols, and DI Water to penetrate those difficult to clean lead-free materials, staying around long enough to clean, yet drying fast enough to keep production flowing. RoHS compliance has resulted in many new soldering materials being introduced into the SMT market place, and new soldering materials have forced the need for new cleaning chemistries. Our Lead-Free Paste Remover meets todays demanding cleaning requirements and is perfect for all types of electronics cleaning, and works equally as well on solder pastes and flux materials that use lead
    Lead-Free-Solder-Paste-Remover.html
  • A safe, low cost cleaner for water soluble and rosin based fluxes and for general degreasing applications. GlobalTech Semi Aqueous Paste & Flux Remover works quickly to remove tough organic contaminants such as soldering oils, waxes, and other similar soils found in electronic assembly manufacturing. Excellent for cleaning printing screens, stencils and for misprinted PC boards. Does not require a rinse.
    Semi-Aqueous-Paste-Remover.html
  • A fast drying odor free solvent, GlobalTech SMT Stencil Cleaner quickly removes solder paste from stencils, squeegees, printers, tools, machinery and PC boards, leaving no residue. Perfect for both manual and automatic cleaning, this formulation has been approved for use by DEK in the solvent bar system for their automatic stencil wiper assembly. An excellent all purpose cleaner and degreaser, it is safe for sue with most plastics and can be used to degrease UV curable inks & adhesives or as a general parts degreaser. Approved for use in DEK solvent bar systems. Not reccoemnded for water soluble pastes and flux.
    SMT-Stencil-Cleaner.html
  • The preferred defluxer for R, RA, & RMA and No Clean type fluxes. GlobalTech Solder Paste & Flux Remover cleans PC boards, contacts, relays, gold fingers and most types of electronic assemblies. Offering superior defluxing properties, this formulation may be used straight for maximum cleaning power or diluted for use in dip or ultrasonic tanks. The relatively high flash point makes this cleaner ideal for spray applications.
    Solder-Paste-&-Flux-Remover.html
  • This is a unique blend of select detergents and solvents formulated to offer safe, non-flammable cleaning in ultrasonic cleaning systems. Used in dilution, SMA effectively cleans uncured surface mount device (SMD) epoxies/adhesives and solder pastes from stencils and misprinted assemblies, and it does not require heating. It is an ideal cleaning agent for electronics manufacturers who want (1) to clean both SMD epoxies/adhesives and solder pastes in one cleaning process and cannot heat the cleaning solution, (2) to reduce or eliminate VOC emissions, (3) to reduce odor in the workplace, (4) to reduce or eliminate flammable or combustible solvents, (5) to improve operator safety, and (6) to reduce chemistry loss due to evaporation
    Aqueous-Cleaner-for-SMT-(SMA).html
  • Certified as a “Clean Air Solvent” by the South Coast Air Quality Management District, (AQP) is more than 95% water based and all ingredients are 100% active. It has been specially formulated to remove solder paste and flux residue from stencils, squeegees, printed circuit boards, and other surfaces. AQP utilizes a proprietary electro-chemistry technology to clean. It works by reversing the normal polarity of the contaminant. The reversal of the polarity causes the like charges of the contaminant and the substrate to repel each other, thereby preventing reattachment to the substrate. The contaminants are suspended from the substrate so they can be washed away, leaving a clean, shiny, water break-free surface. AQP works at a sub-molecular level and is especially suited for use in critical clean applications because of its unique ability to penetrate crevices and orifices to dislodge microscopic contaminants. This method of cleaning drastically improves the cleaning efficiency by minimizing the amount of rinse water needed.
    AquaSonic-for-Solder-Paste-&-Flux.html
  • Heavy Duty Degreaser (HDD) is an aqueous cleaner that is more than 90% water based with all ingredients being 100% active. It has been specially formulated to remove all types of grease, oil, grime, and dirt from all types of surfaces including machinery, engines, farm equipment, trucks, buses, trains, tools, work benchs, floors, walls, kitchens. Our HDD utilizes a proprietary "electro-chemistry" technology to clean that works by reversing the normal polarity of the contaminant. The reversal of the polarity causes the like charges of the contaminant and the work surface to repel each other, thereby preventing reattachment to the surface, enabling them to be rinsed or wiped away with ease. HDD has a unique ability to penetrate crevices and orifices to dislodge microscopic contaminants. This method of cleaning drastically improves the cleaning efficiency by minimizing the amount of rinse water needed. Because HDD leaves no ionic contamination behind, it is an excellent cleaner to be used when cleaning electric or electronic equipment and hardware.
    Heavt-Duty-Degreaser.html
  • The AQP and SMA are both aqueous chemistries that are designed for use in ultrasonic cleaners, Both will clean a variety of soils, including solder paste, flux, and SMD adhesives. They can be used to manually clean these soils by spray and wipe method, or as saturated wipes, but we originally developed them for use in ultrasonic cleaning equipment. The matrix below shows some of the basic differnecs between the features if the two products.
    Performance-Characteristics.html
  • Achieve Original Equipment Manufacturer’s (OEM) specifications with JNJ drop in replacements for squeegee blades and holders. The JNJ, OEM squeegee blade line includes polyurethane blades, flat metal blades, adjustable angle metal blades and squeegee blade holders for leading industry manufacturers such as DEK, deHaart, Fuji, MPM, Panasonic and SMTech. JNJ’s OEM polyurethane squeegee blades are machined, not molded, from cast sheets of high quality polyurethane. Machined blades not only offer increased operational performance but are available from Durometers ranging from 50 to 180. Precision machined blades resist solvents, have sharper edges, and maintain tighter tolerances than molded blades and can be machined to your specifications to fit any printer ever made. JNJ’s OEM metal blades provide a direct retrofit to the manufacturer’s conventional screw mounted or clamped flat metal blades. JNJ’s non-porous ductile coating cleans up easy and aids in paste release. For better than OEM performance, all JNJ metal blades are coated with a proprietary Electrolizing® plating finish.
    Squeegees.html
  • JNJ Industries offers our newest member to the Speedline/MPM squeegee accessory line, squeegee holders to fit the Accela® stencil printer. These squeegee holders match the original equipment manufacturers specifications from Speedline, and are available in the standard lengths offered by the OEM, and also are available in custom lengths to suit the individual customer's needs. The squeegee holders are precision machined from aluminum, and come complete with the mounting knobs. They are available in "gold" anodize as standard for use in manufacturing lines that use leaded solder paste, and in "green" anodize for lines that are running lead free.
    MPM-Accela-Squeegee-Holder,-Metal-Blades.html
  • This page has squeegee balde holders design to hold polyurethane squeegee baldes used on the MPM Accela screen printer form Speedline
    MPM-Accela-Poly-Blade-Holder.html
  • For all SMTech printers as well as the MPM Momentum, Accuflex, SPM-500 and UP-1500 models from MPM/Speedline. These SMH holders are made from gold anodized aluminum and are designed to accept metal and polyurethane blades. Comes complete with mounting studs and knobs. Sold in sets of two. Specify metal and/or polyurethane blades/durometer and length when ordering.
    MPM-Accuflex,-Momentum.html
  • These polyurethane squeegee blades are pre drilled with the mounting hole pattern for each size squeegee holder. They are available in the standard lengths ranging form 140mm up to 420mm, and in hardness's ranging from 60 durometer to 100durometer. The various durometers are color coded for ease of identification.
    SMPBI-Poly-Blades-for-SMH-Holders.html
  • Momentum-Metal-Blade-No-Holes.html
  • The MPM style UPH squeegee blade holder is made to fit the UltraPrint 2000 model printer and most models of the SPM. This holder accommodates flat metal and/or polyurethane blades. Made from gold anodized aluminum, it comes with mounting studs and knobs. Metal and polyurethane blades sold separately. Side solder paste deflectors available.
    MPM-UP2000-SPM-Squeegee-Holder-for-Metal-Blades.html
  • Squeegee blades and holders for MPM AP models and UP 3000 models. For faster, easier blade changes with all MPM AP 20 through the AP-36, AP Excel, and UltraPrint 3000 model printers, JNJ’s APMH holder features quick clamping of flat metal squeegee blades. Made from gold anodized aluminum, the blade is clamped in place between two aluminum brackets. Available with optional side solder paste deflectors and comes with mounting studs and knobs. Sold in sets of two. Also available as a complete assembly, APMHA which includes, APMH Holder, APFMI Blade & Paste Deflectors.
    MPM-AP-and-UP3000.html
  • Replacement metal baldes for APMH
    APFMI.html
  • MPM-AP-Screw-Mount.html
  • This MPM style squeegee blade holder for polyurethane blades is made to fit all AP-20 through AP-36, AP Excel, and UltraPrint 3000 model printers. These holders are made from gold anodized aluminum and are designed to accept 1/4 thick polyurethane squeegee blades from JNJ. Polyurethane blades are available from 50 to 180 durometer, come in lengths from 6 to 24 inches and come complete with mounting studs and knobs. Polyurethane squeegee baldes are used for a wide variety of printing applications that include multi level or "stepped" stencils, when printiing through cross section screens, or when printing lower viscocity materials such as inks, lamiantes, and epoxies. Side solder paste deflectors available. Sold in sets of two.
    AP-Poly-Blade-Holder.html
  • For DEK model 260, 265, 288, Infinity, and Horizon printers. JNJ’s DBHT holders feature a rugged gold (standard) or green (lead free) anodized aluminum housing, complete with mounting studs and knobs, to accommodate either polyurethane blades or the JNJ’s SMartTek metal blades. Available in lengths from 170mm to 535mm. Sold in sets of two. Specify angle of holder at either 60 or 45 degrees when ordering. Blades sold separately under part number DFMBO-* (*specify length) JNJ's DFMBO blades provide a 15mm overhang for a more compliant print. For customers wanting the 6mm overhang, please note that the 6mm overhang blade is considered a custom blade.
    DEK-Squeegees.html
  • For DEK model 260, 265, 288, Infinity, and Horizon printers. JNJ’s DBHT holders feature a rugged gold (standard) or green (lead free) anodized aluminum housing, complete with mounting studs and knobs, to accommodate either polyurethane blades or the JNJ’s SMartTek metal blades. Available in lengths from 170mm to 535mm. Sold in sets of two. Specify angle of holder at either 60 or 45 degrees when ordering.
    DEK-Metal-Blades.html
  • DEK-Poly-Squeegee-Blades-(DPBI).html
  • Lists the various metal and polyurethane squeegee baldes available for the EKRA printers. Various models of the EKRA printers use different styles of metal squeegee blades, depending on the model and age of the printer.
    EKRA.html
  • These rugged hand held squeegee holders are made from gold anodized extruded aluminum. Capable of holding a 3/8 polyurethane blade or the SMartTek™ adjustable angle metal squeegee blade. The polyurethane squeegee blade can also be used as a backing for flat metal blades, part numbers UHFMI on the Metal Blades Assemblies page. There are also metal blades that are sandwiched between two aluminum bars and riveted together to make a sub-assembly, see part numbers UHMBA listed on the Metal Blade Assemblies page. The sub assembly has the same overall thickness of .375" that the polyurethane blades have, so no poly blade is required to be used as a backer.
    Manual-Hand-Held-Squeegees.html
  • Squeegee holders and baldes for JUKI printers
    JUKI-Squeegees.html
  • Small area metal squeegee blade handle designed to print single components such as BGA, micro BGA's, QFP. etc.
    Single-Component-Squeegee.html
  • A Device to hold multiple squeegee holders. Will hold squeegee holders that use thunmb screws to mount them into the printer, such as the DEK, UP2000, Momentum, and others.
    Squeegee-Caddie.html
  • This page is used for the JNJ adjustable angle squeegee blade that is used to print solder paste and other high viscocity materials for printed circuit board assembly.
    Adjustable-Angle-Squeegee.html
  • Shows the drawings with basic dimensions for polyurethane squeegee baldes, with standard durometers and colros.
    Polyurethane-Squeegees.html
  • Part numbers for JNJ Industries polyurethane squeegee baldess
    Poly-Blade-Part-Numbers.html
  • The new and improved squeegee blade cutter from JNJ Industries cuts squeegee blades cleanly and safely. For diamond, single edge and trailing edge (rectangular) shaped polyurethane squeegee blades, this ergonomically designed tool comes with a precision steel blade and a set of 4 replacement blades. Made from cast steel that has been chrome plated to resist rust, the handles are coated in comfortable molded rubber grips, with a slide out storage compartment for spare blades built right into the handle. There is a Safety Lock built into the handle to lock the tool in the closed position when not in use.
    Squeegee-Cutter.html
  • Custom Squeegee Blades, made to your individual specifications. Custom lengths, heights, thickness, hole locations, durtometers, plating, call or e-mail us to see if we can accomodate your requirements.
    Custom-Blade-Form.html
  • Printing-Angles.html
  • JNJ Industries was the first company in the SMT PC Board Assembly industry to offer under stencil wiping rolls other than the stencil printer manufacturers. JNJ manufactures all of our SmartRoll® right in our Franklin, Massachusetts production facility, offering the widest selection of rolls with the fastest available delivery. We can usually ship orders from stock or within 24 hours, even for custom rolls! We use first quality materials for every roll, with Class 100 Clean room fabrics, ESD safe static dissipative shrink film, and lithographical lined core tubes.
    Stencil-Rolls.html
  • JNJ Industries was the first company in the SMT PC Board Assembly industry to offer under stencil wiping rolls other than the stencil printer manufacturers. JNJ manufactures all of our SmartRoll® right in our Franklin, Massachusetts production facility, offering the widest selection of rolls with the fastest available delivery. We can usually ship orders from stock or within 24 hours, even for custom rolls! We use first quality materials for every roll, with Class 100 Clean room fabrics, ESD safe static dissipative shrink film, and lithographical lined core tubes.
    Material-Types.html
  • Most DEK printers use stencil rolls that are based on the same core tube, which is a plastic tube with a .75" inside diameter (19.5mm), that is 20.87" Long (530mm). The typical roll outside diameter is 2.25", and it has 36 linear feet of paper per roll. The full width roll has paper that is 20.37" wide (515mm), but some boards or printers are set up to accommodate a roll with narrower width paper. It is important to make sure that when using a roll with paper that is not the full width that if a solvent bar system is being used, that the paper width is equal to or larger than the width of where the solvent is dispensed from the solvent bar.
    DEK-Rolls.html
  • The EKRA printers use stencil rolls with a smaller core tube inside diameter (ID) than most printers on the market. The EKRA stencil roll has a .500" (13mm) ID, and they also have a smaller outside diameter than many rolls, typically being 2". Most EKRA printers have an adjustable stop mechanism so that various width rolls can be used on the same printer by moving the stop mechanism either in for narrow rolls or out for wider rolls.
    Ekra-Rolls.html
  • Fuji-Rolls.html
  • Juki-Stencil-Rolls.html
  • Most MPM printers accommodate the roll with the 18"long core tube. The new MPM Accela can accommodate a "high capacity" roll that has 130 linear feet of material, and just under a 4.0" outside diameter. The UP2000, UP3000, and all of the AP models use a roll with a 3/4" inside diameter core tube and a 2.5" roll OD. The roll OD determines the amount of linear feet per roll, with most having 39'. The former SM Tech models that were integrated into the MPM line, and re-engineered as the UP12500 and more recently as the Momentum typically use the rolls with a 1.5” core ID, JNJ part numbers ending in “SM”.
    MPM-Rolls.html
  • Panasonic and KME printers typically use rolls wound on cores with a 1 1/2" inside diameter, and they can often times accommodate over 108 linear feet of paper with an outside roll diameter of up to 4". Though some newer models such as the SP-18 use a roll wound on 3/4" ID core tube, that are available in various widths, one of which is 14" and another that is 21" wide. These 3/4" ID core tubes also have notches in both ends of the tubes that are used for the wiper roll drive system to index the paper.
    Panasonic-KME-Rolls.html
  • Samsung-Rolls.html
  • Sanyo-Rolls.html
  • SM-Tech-Rolls.html
  • this page has the stencil roll prodcuts that fit printers from Yamaha
    Yamaha-Rolls.html
  • Custom-Rolls.html
  • INDUSTRIAL CLEANING PRODUCTS ENVIRONMENTALLY FRIENDLY USER FRIENDLY
    Industrial.html
  • A universal cleaner and disinfectant, these alcohol wipes are available in pure IPA or in a blend with de-ionized water. GlobalTech Isopropyl Alcohol formulations remove most types of inks, pastes, light oils and contaminants associated with manufacturing environments, printing and most industrial cleaning applications. Made with an industrial quality wipe material, these are ideal for wiping down machines, tools, assemblies, mechanical parts, electrical hardware, and equipment. IPA is safe for use on all types of surfaces made from a variety of materials, and will not harm plastics.
    Industrial-Grade-IPA-Wipes.html
  • Heavy Duty Degreaser (HDD) is an aqueous cleaner that is more than 90% water based with all ingredients being 100% active. It has been specially formulated to remove all types of grease, oil, grime, and dirt from all types of surfaces including machinery, engines, farm equipment, trucks, buses, trains, tools, work benches, floors, walls, kitchens. Our HDD utilizes a proprietary "electro-chemistry" technology to clean that works by reversing the normal polarity of the contaminant. The reversal of the polarity causes the like charges of the contaminant and the work surface to repel each other, thereby preventing reattachment to the surface, enabling them to be rinsed or wiped away with ease. HDD has a unique ability to penetrate crevices and orifices to dislodge microscopic contaminants. This method of cleaning drastically improves the cleaning efficiency by minimizing the amount of rinse water needed.
    Degreasers.html
  • GlobalTech® Industrial Hand Cleaner wipes are a high performance, general purpose cleaner in a pre-saturated wipe dispenser. They clean hands without the need to leave the work area or to go to a sink. Hands will dry quickly, and require no rinsing or toweling off like other scrubby wipes. They are Laboratory Certified to be effective in the removal of toxic metals from skin. Heavy and undetectable metals and contaminants are removed from the skin before absorption, preventing materials from being ingested into the liver, which can cause some forms of cancer. Used, as a service pack, at the work station, or any location where field services/operators/technicians hands become soiled. They are great for removing paint, grease, oil, dirt, and grime.
    Hand-Cleaner.html
  • This is cleaning system that includes a spray cleaner with microfiber wipe that is used to clean flat panel and tocuh screen displays. It is designed for use to clean tablet computers, touch screen monitors, E-Readers, laptop screens, Flat panel TV's, optics, camera lenses, eye glasses, and much more.
    Industrial-Flat-Panel-Display-Cleaner.html
  • A super aggressive solvent for cleaning conductive epoxies, 2 part epoxies, label adhesives, labels, and most varieties of glue or adhesive residues. Excellent for cleaning screen printable epoxies used in electronics. Tested and approved for Heraeus epoxies, epoxy numbers PD911, PD 922, & PD86002. The Industrial Wipe uses our dual action wipe substrate, with one abrasive side for handling tough jobs and one smooth side more delicate jobs.
    Adhesive-Removers.html
  • This page will list documents and declarations for RoHS nad Reach compliance.RoHS and REACH are European driven legislation that were developed to help maintain worker safety and environmental safety based on the removal of hazardous substances and chemicals, and helping individuals and companies identify and manage the chemicals used in the manufacturing of their products. JNJ Industries has always been an environmentally conscious company, using chemicals that are low in toxicity and environmentally safe. Our GlobalTech chemical line has always been CFC and HCFC free and do not contain ozone depletors. Our products do not contain any of the substances identified by RoHS and are all REACH compliant
    RoHS-REACH.html
  • Adding a list of useful web sites and be a quick and easy way of generating a content rich page that will be useful to visitors, but that should also rank well in the search engines if the sites are appropriate and the descriptions you enter for the sites make use of your chosen keywords and phrases. Industry Web Links, Industry Publications, Trade Organizations
    Industry-Links.html
  • This is the page where you can find material safety data sheets and techncial data sheets. The techncial support documents for the chemcial and wipe products are found heer.
    Documents.html
  • Contact Pages are are great way to engage with your visitors and demonstrate that you are a real person rather than simply an anonymous web site.
    Contact-Us.html
  • This is where you can locate JNJ distributors to purchase our products.
    Distributors.html
  • Press releases are available from a wide variety of sources. They provide an excellent source for quality content and they can be edited to meet your particular requirements.
    News.html
  • If you have a lot of news items to include it can be worth splitting them into months and have a parent page for each month with subpages underneath. This allows you to create a significant number of pages for your site with very little effort.
    LFPR-Press-Release.html
  • Flat-Panel-Display-Cleaner-Press-Release.html
  • For some niches you will find that there is an abundance of free press releases available. This is particularly true of the technology industry, but many other market places also generate significant volumes of news.
    Bioact-Press-Release.html
  • Sometimes you will find press releases on the individual company sites, other times there will be an industry body the distributes news releases to all appropriate parties and usually they will make them freely available on their web site.
    HDD-Press-Release.html
  • Usually news releases come in a format that allow you to edit them. This can be particularly useful if you want to include some of your chosen keywords and phrases. Obviously, it is not ethical to change the meaning of the press release by adding inappropriate words and phrases, but it is fine if the words and phrases you add do not change the press release to the point where it is no longer accurate.
    810-B-Press-Release.html