800-554-9994
508-553-0529
508-553-9973-Fax

DEK Series™

DEK Blade Holder with Tapped Holes

Click for Full Screen Image

Note: Shown in "Lead Free" green color.

For DEK model 260, 265, 288, Infinity, and Horizon printers. JNJ’s DBHT holders feature a rugged gold (standard) or green (lead free) anodized aluminum housing, complete with mounting studs and knobs, to accommodate either polyurethane blades or the JNJ’s SMartTek metal blades.  Available in lengths from 170mm to 535mm. Sold in sets of two. Specify angle of holder at either 30 or 45 degrees when ordering. Blades sold separately under part number DFMBO-* (*specify length) JNJ's DFMBO blades provide a 15mm overhang for a more compliant print. For customers wanting the 6mm overhang, please note that the 6mm overhang blade is considered a custom blade.  

For information on Polyurethane Blades for the JNJ DBHT holder, click here.

** For our special holders intended for Lead Free Lines, add "-LF" to the part number when ordering.

DEK Blade Holder for Adjustable Angle Metal Blade

Click for Full Screen Image

For the maximum range of attack angles on DEK model 260, 265, and 288 printers, JNJ’s DBHA holders deliver 20 to 70 degree adjustment of DMSI metal blades. Each assembly is made from gold anodized aluminum and is designed to work with JNJ’s SMartTek™ metal squeegee inserts. Includes mounting studs and knobs. Fixed pin stop positions at 30 and 45 degrees. Side solder paste deflectors available. Sold in sets of two. DMSI inserts sold separately.

Polyurethane Blades for DBHT Screw Mount Holder

DEK Screw Mount Flat Metal Blade 

Screw Mount Flat Metal Blades for the JNJ DEK holder, DBHT. These blades